AIA SF COTE
Online Webinar / AIA SF - 130 Sutter St. Suite 600, San Francisco, California 94104
November 19, 2019
Effective integration of energy simulation in the design process is not yet standard practice. Making the jump to performance guided design can be challenging for both designers and energy analysts without experience. In this presentation Erik Kolderup will discuss ASHRAE Standard 209-2018 Energy Simulation Aided Design, which provides guidance for integrating energy analysis in the design of nonresidential buildings. The new AIA guide Integrating Performance Simulation in the Design Process references Std 209 and describes how to simplify the process of integrating performance modeling into design by defining minimum requirements for providing energy design simulation and analysis at different stages of design. The program will also feature a local architect discussing how their firm has used energy modeling to support design.
A Live Webinar is available for those unable to attend the event in person
Date & TIme: Tuesday, November 19, 2019; 12:00 pm – 1:30 pm
Location: AIA SF
Erik Kolderup, PE, LEED AP, is Principal of Kolderup Consulting based in San Francisco, California. He has provided sustainability and energy consulting services since 1990, when he joined Eley Associates as an energy engineer. He became an owner in 1994 and served as vice president until the firm’s merger with Architectural Energy Corporation in 2004. After three years as Associate Principal, sharing management of AEC’s San Francisco office, Mr. Kolderup started Kolderup Consulting in 2007. He is also a consulting faculty member at Stanford University where he teaches a class on energy-efficient building systems. He holds degrees in electrical engineering and industrial engineering from Stanford University. He was a voting member of the ASHRAE Standard 209 Committee.
Don't miss the other events in this series, held at the AIA San Francisco with accompanying simulcast webinar:
Monday November 25th 12:00-1:30pm:
Can Architects do their Own Energy Analysis and Modeling? (Concept Design Phase)
Wednesday December 11th 12:00-1:30pm:
Effective Integration of Energy Modeling During the SD & DD Phase
Reproduction and publication of this article and its contents in no way implies that IBPSA-USA endorses the products/services mentioned.